Super Soundproofing Community Forum
July 31, 2010, 11:51:18 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need an answer right now? Go to http://www.soundproofing.org, or,  FEEDBACK or call us toll-free at 888-942-7723 8-5 Pacific time Weekdays.  Click and we'll call YOU back in 30 seconds! CALL!

  If we're not in, send a email to support@soundproofing.org

You may have to turn off your pop-up blocker to use these links!
 
   Home   Help Search Login Register  
Pages: 1   Go Down
  Send this topic  |  Print  
Author Topic: soundproofing unused bathroom door  (Read 1259 times)
George P
Guest
« on: December 09, 2005, 08:45:36 PM »

Hey there. I rent a bedroom, and it has its own door into the (shared) bathroom. I never use that door and it lets through too much sound, which makes me concerned about my privacy.

Given that I never need to open this door, and I can only treat my side, whats the best thing I can do? If I get soundproofing mat, will it help to cover the entire doorframe along with the door?

Thanks,
George
Report to moderator   Logged
supersoundproofing
Guest
« Reply #1 on: December 11, 2005, 09:34:15 PM »

Yes

BJ Nash
Report to moderator   Logged
Kathy Gannett
Guest
« Reply #2 on: January 01, 2006, 12:02:11 PM »

I have a similar issue with a bathroom door that is off my bedroom.  I do not use the bathroom door - it is the bathroom in my rental apartment that is on the same fllor I live on.  I don't yet want to replace the door with a wall.  Even if I did I wouldn't know what material would reduce the sound crossing through.  I am thinking of hanging curtains over the door on my side.

Kathy
Report to moderator   Logged
skip
Guest
« Reply #3 on: September 23, 2006, 10:59:48 AM »

Your options could be as follows:

1. Replace the door with a SOLID CORE door that fits
   tightly when closed. No air gap at bottom of door.

                                 -OR-

2. Try putting a layer of Closed Cell Sound Absorbing
   Foam on your side of the door. A thickness of 1 inch
   would be appropriate.
Report to moderator   Logged
Pages: 1   Go Up
  Send this topic  |  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.1 | SMF © 2006, Simple Machines LLC Valid XHTML 1.0! Valid CSS!