Author Topic: Wall construction - Float them or Set the base plate  (Read 2671 times)

Sam2011

  • Guest
Wall construction - Float them or Set the base plate
« on: December 28, 2010, 05:45:50 PM »
Hello,

Soon I plan to start building interior walls within a cinder block building. Since I won't install a floating floor or a ceiling it won't exactly be a complete room within a room.

I really don't want any low frequency sound to transfer to the cinder block. Higher frequencies are not going to be an issue.

My question is, is it better to float (or completely decouple) the new interior walls from the floor AND ceiling or fix the base plate and decouple the wall at the ceiling joists only?

My thinking is that since the building already has fairly massive cinder block walls, it might be better to build interior walls that are completely decoupled from the ceiling and floor. If they have some flex maybe they will absorb the vibrational energy of low frequencies better than rigid walls or walls decoupled only at the ceiling.

Thanks in advance for any advice on this situation!

Randy S

  • Senior Soundproofing Technical Specialist
  • Global Moderator
  • *****
  • Posts: 788
    • Super Soundproofing Co
Re: Wall construction - Float them or Set the base plate
« Reply #1 on: January 03, 2011, 06:48:35 PM »
Decouple the entire room is the best option for low frequency. Or you can frame up then decouple off the new frame work with clips and channel and then install a floated floor.
Randy Sieg

Super Soundproofing Co
www.soundproofing.org
888-942-7723
Ph. 760-752-3030
Fax.760-752-3040

 

anything