Author Topic: DIY CnC Machine Soundproofing  (Read 5678 times)

dgchessman2

  • Guest
DIY CnC Machine Soundproofing
« on: March 15, 2012, 06:24:42 AM »
I know this is a bit of an odd question, but I'm going to be moving into an apartment soon, and need to start pre-planning one of my major projects for 2012:  A DIY CnC machine.  Pictures are here:

http://www.ebay.com/itm/PLANS-build-CNC-3-axis-router-table-milling-machine-engraver-PDF-download-/270857040023?pt=LH_DefaultDomain_0&hash=item3f10567097

The clear windows are.... optional.  I thought that I could put a hinged outer case over the case already there, with sound-insulating panels to drop over the windows once the machine is running properly.

Honestly, my biggest confusion is in materials!  Is this a job for a matting, padding, foam, 'deadspace'...?  I know that footers underneath will probably be required one way or another, but what about the other spaces?

It will have a 2 hp laminate trimmer working inside, as well as 3 other motors.  I need to get this down to 'not getting evicted' levels of noise, as my business can't go on hold for 8 months while we rent an apartment prior to home ownership.

Anything helps!  And thank you ahead of time.

Randy S

  • Senior Soundproofing Technical Specialist
  • Global Moderator
  • *****
  • Posts: 778
    • Super Soundproofing Co
Re: DIY CnC Machine Soundproofing
« Reply #1 on: March 20, 2012, 05:41:48 PM »
Build your enclosure as you see fit and line the entire thing with our Mass loaded vinyl w/ closed cell foam.. that easy.
https://www.supersoundproofingsales.com/prodinfo.asp?number=09-00005CC-54F

Randy Sieg

Super Soundproofing Co
www.soundproofing.org
888-942-7723
Ph. 760-752-3030
Fax.760-752-3040

 

anything