Author Topic: Turning Trailer into Woodshop  (Read 2364 times)

David B

  • Guest
Turning Trailer into Woodshop
« on: July 17, 2013, 03:09:54 PM »
Our company is interested in creating a mobile cnc woodshop.  The plan is to take a auto trailer and modify it.  I saw the "quieting in the home" book available on the website, and I'm wondering if that would be a good place to start.  The noise will be created by 3 or 4 wood routers running continuously inside the shop.  The routers have their own ventilation, but some ventilation will be needed for the trailer itself, probably requiring a muffler.  The trailer will be parked in a variety of locations, so the quieter the better.
Just getting started, so any advice is welcome. 

Randy S

  • Senior Soundproofing Technical Specialist
  • Global Moderator
  • *****
  • Posts: 785
    • Super Soundproofing Co
Re: Turning Trailer into Woodshop
« Reply #1 on: July 18, 2013, 04:35:47 PM »

It would be best to give me a call direct. There are a couple ways to approach this type of project but the most critical component will be max weight load of the trailer.

I look forward to hearing from you.

Randy S.

760-752-3030 ext 104
Randy Sieg

Super Soundproofing Co
Ph. 760-752-3030