Author Topic: How can I distinguish btwn truck vibrations passing through window versus wall?  (Read 2339 times)

MikeinSF

  • Guest
I'm assuming that through windows, this is resolvable. Through walls, much less so.

I live in a victorian with old windows that open onto a road and 4-way stop frequented by busses and trucks (and as I write this, motorcycles ....). I can feel what seems like a change in pressure or vibrations throughout the apartment when the bigger vehicles pass, and I don't want to chase after a window-based solution that only solves part of the problem.

Thanks!


Randy S

  • Senior Soundproofing Technical Specialist
  • Global Moderator
  • *****
  • Posts: 819
    • Super Soundproofing Co
well you need to look at the project the right way, your whole home is like a soap bubble and the soundproofing is only as good as the weakest spot.
So you normally start with windows and doors first. Build these areas up to the highest STC possible and then if they are stronger then the walls that is when you attack the walls.
 I know it can be a pain in the rear...but if you start with the walls most likely you will always look at the windows and doors as the culprit.

Now, there are a lot of variables that go into play with traffic noise based on the construction of the home, like raised foundation, lathe and plaster, distance to source etc etc...

So lets approach the problem methodically, you need to mimic what you see on commercial airplanes windows. 2 pieces of glass with the greatest airspace between them. The doors need to be as heavy as you can get and sealed air tight in the closed position.
once this has been done you will evaluate the reduction and determine if walls can be improved.

Feel free to contact me direct to discuss.

Randy S.
760-752-3030 ext 104 
Randy Sieg

Super Soundproofing Co
www.soundproofing.org
888-942-7723
Ph. 760-752-3030
Fax.760-752-3040

 

anything